Every router has a default gateway IP address used to access its admin panel. This directory covers every common router login IP — from the ubiquitous 192.168.1.1 to less-known ranges — with a step-by-step login guide for each. Find your IP, click through, and get into your router settings in seconds.
Check the label on the back of your router, or run ipconfig (Windows) / ip route (Mac/Linux) to find your default gateway.
Type the IP address directly into your browser’s address bar — not the search bar. Example: http://192.168.1.1
Use the default username and password (often admin / admin) or check your router’s sticker for the exact credentials.
Change Wi-Fi name, password, security settings, port forwarding, parental controls, and firmware from the admin dashboard.
Popular Router IP AddressesMost Common
10 addressesThe most widely used default gateway IPs across consumer routers from TP-Link, Netgear, Linksys, ASUS, D-Link, and more. Start here if you’re unsure which IP your router uses.
192.168.0.x — Subnet Range
27 addressesThe 192.168.0.x subnet is used by many Netgear, D-Link, Belkin, and older Linksys routers. The gateway is most commonly 192.168.0.1 or 192.168.0.254.
192.168.1.x — Subnet Range
45 addressesThe most widely deployed private subnet, default for TP-Link, ASUS, Linksys, Cisco, and many others. 192.168.1.1 is the single most common router gateway IP in the world.
192.168.2.x – 192.168.9.x Range
12 addressesThese subnets appear on select Belkin (192.168.2.1), Huawei (192.168.8.1), and ISP-configured devices that use non-standard default gateways.
192.168.10.x – 192.168.99.x Range
34 addressesUsed by enterprise-grade consumer routers, ISP-supplied modems, and devices from MikroTik (192.168.88.1), AVM FRITZ!Box, and TP-Link Deco systems.
192.168.100.x – 192.168.254.x Range
40 addressesCommon with cable modems, ISP gateways, and specialty routers. AVM FRITZ!Box routers widely use the 192.168.178.x subnet. Addresses like 192.168.254.254 appear on high-end managed routers.
10.x.x.x — Class A Private Range
13 addressesThe 10.0.0.0/8 block is used by Apple AirPort devices, corporate-grade routers, and some ISPs as the default gateway. 10.0.0.1 and 10.0.0.2 are the most common gateways in this class.
172.16.x.x — Class B Private Range
2 addressesThe 172.16.0.0/12 block appears on enterprise-grade and managed network equipment. These addresses are RFC 1918 compliant private IPs rarely seen on consumer routers.
Other IP Ranges
2 addressesThese fall outside standard RFC 1918 private ranges. 169.254.1.1 is an APIPA link-local address used when DHCP is unavailable. 20.0.0.1 is used by select routers as a non-standard admin gateway.
Frequently Asked Questions
On Windows, open Command Prompt and run ipconfig — look for “Default Gateway.” On Mac/Linux, run ip route | grep default or check System Preferences → Network.
Most routers use admin / admin, admin / password, or a blank password. Check the sticker on your router’s back — it usually lists the exact credentials.
Ensure you’re connected to the router’s network. Type the IP directly in the address bar, not the search bar. Try both http:// and https:// versions of the address.
They’re IPs from different subnets — both valid private addresses. Which one your router uses depends on the manufacturer’s default settings. Both function identically as gateway addresses.
Perform a factory reset by holding the reset button on your router for 10–30 seconds. This restores default credentials, but also resets all your network settings.
Yes, as long as you’re on your own network. Always change the default admin password after first login to prevent unauthorized access to your router settings.